Click above to get retro games delivered to your door ever month!

        PadCodeSegments=<0-or-1>

   Default: 0
   Purpose: Setting this value to 1 causes Windows kernel to
            pad code segments with 16 bytes. This will
            prevent the last instruction in the segment
            from being too close to the segment limit for
            80286 C2 stepping. You only need to set this
            value to 1 for this 80286 stepping.
            Unfortunately, there is no easy way of telling
            what stepping a 80286 chip is. Try setting this
            value to 1 if your 80286 system hangs in
            standard mode.
   To change: Use Notepad to edit the SYSTEM.INI file.