Click above to get retro games delivered to your door ever month!
<![CDATA[
COMMON PJL COMMANDS--4 FAMILY
The following are commonly used PJL commands to change
default menu settings for the LaserJet 4 family and
above. The command used is the "DEFAULT" command which
permanently changes the default menu setting. To
change default settings for just the current job
replace "DEFAULT" with the "SET" command.
SYMBOL SET
The following command permanently changes the default
menu setting of the LaserJet 4 family to the PC-8
symbol set.
Ec%-12345X@PJL DEFAULT LPARM : PCL SYMSET = PC8 <CR>
<LF>
Ec%-12345X
FONT NUMBER
The following command permanently changes the default
menu setting of the LaserJet 4 family to font number 2.
Ec%-12345X@PJL DEFAULT LPARM : PCL FONTNUMBER = 2 <CR>
<LF>
Ec%-12345X
PITCH SIZE
The following command permanently changes the default
menu of the LaserJet 4 family to a pitch size of 16.67.
Ec%-12345X@PJL DEFAULT LPARM : PCL PITCH = 16.67 <CR>
<LF>
Ec%-12345X
NOTE: Variables are .44 to 99.99
POINT SIZE
The following command permanently changes the default
menu of the LaserJet 4 family to point size 20.
Ec%-12345X@PJL DEFAULT LPARM : PCL PTSIZE = 20 <CR>
<LF>
Ec%-12345X
NOTE: Variables are 4 to 999.75
FORMLINES
The following command permanently changes the front
menu panel of the LaserJet 4 family to 66 lines per
page.
Ec%-12345X@PJL DEFAULT FORMLINES = 66 <CR> <LF>
Ec%-12345X
NOTE: Variables are 5 to 128
PAPER SIZE
The following command permanently changes the default
menu setting of the LaserJet 4 family to a paper size
of legal.
Ec%-12345X@PJL DEFAULT PAPER = LEGAL
Ec%-12345X
NOTE: Variables are Letter, Legal,
Executive, Com10, B5, A4, C5, DL
and Monarch
ORIENTATION
The following command permanently changes the default
menu setting of the LaserJet 4 family to Landscape
orientation.
Ec%-12345X@PJL DEFAULT ORIENTATION = LANDSCAPE <CR>
<LF>
Ec%-12345X
COPIES
Ec%-12345X@PJL DEFAULT COPIES = 1 to 999 <CR> <LF>
Ec%-12345X
MANUAL FEED
Ec%-12345X@PJL DEFAULT MANUALFEED = ON or OFF <CR> <LF>
Ec%-12345X
ECONOMODE ( LASERJET 4L / 4ML and LASERJET 4P/4MP )
Ec%-12345X@PJL DEFAULT ECONOMODE = ON or OFF <CR> <LF>
Ec%-12345X
DENSITY
Ec%-12345X@PJL DEFAULT DENSITY = 1, 2, 3, 4 or 5 <CR>
<LF>
Ec%-12345X
NOTE: Not supported on LaserJet 4Si /
LaserJet 4SiMX
Read-only on the LaserJet 4 /
4M
RESOLUTION
Ec%-12345X@PJL DEFAULT RESOLUTION = 300 or 600 <CR>
<LF>
Ec%-12345X
NOTE: Not supported on LaserJet 4L / 4ML
printer.
Read-only on LaserJet 4 / 4M printer.
RESOLUTION ENHANCEMENT
Ec%-12345X@PJL DEFAULT RET = OFF, LIGHT, MEDIUM OR DARK
<CR> <LF>
Ec%-12345X
NOTE: On the LaserJet 4Si / 4SiMX the variables
are ON or OFF only.
JOB OFFSET ( LASERJET 4SI / LASERJET 4SIMX )
Ec%-12345X @PJL DEFAULT JOBOFFSET = ON or OFF <CR> <LF>
Ec%-12345X
OUTBIN ( LASERJET 4SI / LASERJET 4SIMX )
Ec%-12345X@PJL DEFAULT OUTBIN = UPPER or LOWER <CR>
<LF>
Ec%-12345X
DUPLEX ( LASERJET 4SI / LASERJET 4SIMX )
Ec%-12345X@PJL DEFAULT DUPLEX = ON or OFF <CR> <LF>
Ec%-12345X
Copyright Hewlett-Packard Co. 1993
The information contained herein is subject to change
without notice.
Hewlett-Packard shall not be liable for incidental or
consequential damages in connection with the use of this
material.
]]>