Click above to get retro games delivered to your door ever month!

        00E - Diagnostics Status Byte

                    1xxx xxxx  Real-Time Clock Chip Power
                                 When set to 1, this bit indicates the real-
                                 time clock chip lost power.
                    x1xx xxxx  Configuration Record and Chechsum Status
                                 When this bit is set to 1, the checksum is
                                 incorrect.
                    xx1x xxxx  Incorrect Configuration
                                 This is a check, at power-on time, of the
                                 Equipment byte. When set to 1, the confi-
                                 guration information is incorrect. Power-on
                                 checks require that at least on diskette
                                 drive be installed (bit 0 of the equipment
                                 byte - 014 - is set to 1).
                    xxx1 xxxx  Memory Size Miscompare
                                 When set to 1, the power-on check determined
                                 that the memory size is not the same as in
                                 the configuration record.
                    xxxx 1xxx  Fixed Disk Controller
                                 When set to 1, this bit indicates that the
                                 controller or drive C failed initialization,
                                 which prevents the system from attempting
                                 a power-on reset.
                    xxxx x1xx  Time Status Indicator
                                 When set to 0, this bit indicates the time
                                 is valid. When set to 1, this bit indicates
                                 the time is invalid.
                    xxxx xx1x  Adapter Configuration Miscompare
                                 This bit indicates if the installed adapters
                                 match the configuration information. When
                                 set to 1, the adapter do not match the
                                 configuration information.
                    xxxx xxx1  Adapter ID Time-Out
                                 When set to 1, this bit indicates a time-out
                                 while an adapter ID was being read.