Click above to get retro games delivered to your door ever month!

The F1 key opens the Options / Help Menu. In this menu you can select 
the following features:

  Select File    - Opens the file selection menu. Press <ENTER> to
                   select a Help File, <Alt R> to rescan the file 
                   list or <ESC> to close the menu without 
                   selecting a new file.


  Text Search    - Prompts for a search keyword and activates
                   the search routine. By pressing <ENTER> you will 
                   restrict the search to the current Short Topic List 
                   or the current Long Entry Text. By pressing <F2>, 
                   the entire file will be searched beginning at the first 
                   menu/item and continue through the file until 
                   finished. The order of the search is KeyWord -> 
                   Short Topic Lists -> Long Entry Text. The search 
                   can be aborted at any time by pressing the <ESC> key.
               
                   If the search is successful, the menu highlight will
                   be positioned over the line that contains the
                   keyword match.
               
                   If the search fails, you will hear a short beep and
                   the message Not Found  will appear in the lower 
                   right corner of the display window.
               

  Find Next      - Searches for the next match that was defined in
                   the search window or by the auto-lookup routine when
                   Expert Help was popped-up. 


  Leave Image    - Lets you leave an image of the display
                   window on the screen and returns you to
                   your work. The image is cleared from the
                   screen when the program you are using
                   repaints the screen (usually an <ENTER> key
                   press will cause a screen repaint.)


  Auto-Lookup    - Toggles the auto-lookup routine ON/OFF.
                   When ON, the auto-lookup routine will launch a 
                   search based on the keyword that was read (from
                   the cursor location) at the time Expert Help was 
                   popped-up. The search will continue throughout the 
                   entire file. The search starts at menu 1/item 1
                   and is performed in the following order; 
                   KeyWord -> Short Topic Lists -> Long Entry Text. 
                   
                   If a match is found, the highlite bar will be 
                   positioned over the line. If no match was found, 
                   Expert Help will sound a beep and display a 
                   Not Found message in the lower right corner of the 
                   screen. Also, if the screen is in half-screen mode and 
                   the Auto-Lookup feature is turned ON, the window will 
                   position itself away from the cursor (when EH is 
                   popped-up).
  

  Mark and Paste - Activates the Mark and Paste Routine. The
                   Mark and Paste feature lets you paste text
                   into your program (usually an editor or
                   word processor). Once you have activated
                   the Mark and Paste routine, use the cursor
                   pad (arrow keys, etc.) to highlite a block
                   of text. When finished press <ENTER>, Expert
                   Help will pop-down and the text block will
                   be written into your editor or foreground
                   program.
                  

  Mark and Save  - Activates the Mark and Save Text feature.
                   The Mark and Save Text feature lets you highlite a 
                   block of text and send it to a file or printer. You 
                   can append or overwrite text that is sent to a file.
                   
                   Once you have activated the Mark and Save Text routine, 
                   use the cursor pad (arrow keys, etc.) to highlite 
                   a block of text. When finished press <ENTER>, a window 
                   will display a prompt requesting the filename to write 
                   the text to. The default is to send the text to your 
                   printer. Once the file has been selected, a status 
                   window will display the progress of your request and 
                   prompt you for any actions that may be required.
                   

   Full Screen   - Toggles the Display Window to either Full
                   Screen or Half Screen mode. In Half Screen
                   mode you are able to move the window up and
                   down using the <Shift Up/Dn> Arrow Keys. Also
                   if the screen is in half-screen mode and the
                   Auto-Lookup feature is turned ON the window
                   will position itself away from the search
                   word (when popped-up).


  Set Colors     - Opens the Color Selection Window. In this
                   window you can set the display colors of
                   the Display Window. To make your changes
                   permanent, use the Save Options feature.
                   If you use the command line switch -I, you
                   will be able to choose from 16 background
                   colors.


  Set Hot-Key    - Opens the Hot Key selection window. In
                   this window, you can change the Hot Key that
                   pops up/down the Display Window. To make your
                   changes permanent select Save Options
                   menu item.


  Uninstall      - Unloads Expert Help from Memory.


  Save Options   - Saves all current settings to the EH.INI
                   configuration file. Settings include, color,
                   hot key, default help file, auto-lookup and
                   full/half screen status.